| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rocker: fix memory leak in rocker_world_port_post_fini()
In rocker_world_port_pre_init(), rocker_port->wpriv is allocated with
kzalloc(wops->port_priv_size, GFP_KERNEL). However, in
rocker_world_port_post_fini(), the memory is only freed when
wops->port_post_fini callback is set:
if (!wops->port_post_fini)
return;
wops->port_post_fini(rocker_port);
kfree(rocker_port->wpriv);
Since rocker_ofdpa_ops does not implement port_post_fini callback
(it is NULL), the wpriv memory allocated for each port is never freed
when ports are removed. This leads to a memory leak of
sizeof(struct ofdpa_port) bytes per port on every device removal.
Fix this by always calling kfree(rocker_port->wpriv) regardless of
whether the port_post_fini callback exists. |
| In the Linux kernel, the following vulnerability has been resolved:
sfc: fix deadlock in RSS config read
Since cited commit, core locks the net_device's rss_lock when handling
ethtool -x command, so driver's implementation should not lock it
again. Remove the latter. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Fix NULL pointer dereference in ice_vsi_set_napi_queues
Add NULL pointer checks in ice_vsi_set_napi_queues() to prevent crashes
during resume from suspend when rings[q_idx]->q_vector is NULL.
Tested adaptor:
60:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller E810-XXV for SFP [8086:159b] (rev 02)
Subsystem: Intel Corporation Ethernet Network Adapter E810-XXV-2 [8086:4003]
SR-IOV state: both disabled and enabled can reproduce this issue.
kernel version: v6.18
Reproduce steps:
Boot up and execute suspend like systemctl suspend or rtcwake.
Log:
<1>[ 231.443607] BUG: kernel NULL pointer dereference, address: 0000000000000040
<1>[ 231.444052] #PF: supervisor read access in kernel mode
<1>[ 231.444484] #PF: error_code(0x0000) - not-present page
<6>[ 231.444913] PGD 0 P4D 0
<4>[ 231.445342] Oops: Oops: 0000 [#1] SMP NOPTI
<4>[ 231.446635] RIP: 0010:netif_queue_set_napi+0xa/0x170
<4>[ 231.447067] Code: 31 f6 31 ff c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 85 c9 74 0b <48> 83 79 30 00 0f 84 39 01 00 00 55 41 89 d1 49 89 f8 89 f2 48 89
<4>[ 231.447513] RSP: 0018:ffffcc780fc078c0 EFLAGS: 00010202
<4>[ 231.447961] RAX: ffff8b848ca30400 RBX: ffff8b848caf2028 RCX: 0000000000000010
<4>[ 231.448443] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8b848dbd4000
<4>[ 231.448896] RBP: ffffcc780fc078e8 R08: 0000000000000000 R09: 0000000000000000
<4>[ 231.449345] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
<4>[ 231.449817] R13: ffff8b848dbd4000 R14: ffff8b84833390c8 R15: 0000000000000000
<4>[ 231.450265] FS: 00007c7b29e9d740(0000) GS:ffff8b8c068e2000(0000) knlGS:0000000000000000
<4>[ 231.450715] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 231.451179] CR2: 0000000000000040 CR3: 000000030626f004 CR4: 0000000000f72ef0
<4>[ 231.451629] PKRU: 55555554
<4>[ 231.452076] Call Trace:
<4>[ 231.452549] <TASK>
<4>[ 231.452996] ? ice_vsi_set_napi_queues+0x4d/0x110 [ice]
<4>[ 231.453482] ice_resume+0xfd/0x220 [ice]
<4>[ 231.453977] ? __pfx_pci_pm_resume+0x10/0x10
<4>[ 231.454425] pci_pm_resume+0x8c/0x140
<4>[ 231.454872] ? __pfx_pci_pm_resume+0x10/0x10
<4>[ 231.455347] dpm_run_callback+0x5f/0x160
<4>[ 231.455796] ? dpm_wait_for_superior+0x107/0x170
<4>[ 231.456244] device_resume+0x177/0x270
<4>[ 231.456708] dpm_resume+0x209/0x2f0
<4>[ 231.457151] dpm_resume_end+0x15/0x30
<4>[ 231.457596] suspend_devices_and_enter+0x1da/0x2b0
<4>[ 231.458054] enter_state+0x10e/0x570
Add defensive checks for both the ring pointer and its q_vector
before dereferencing, allowing the system to resume successfully even when
q_vectors are unmapped. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: Fix race between rfkill and nci_unregister_device().
syzbot reported the splat below [0] without a repro.
It indicates that struct nci_dev.cmd_wq had been destroyed before
nci_close_device() was called via rfkill.
nci_dev.cmd_wq is only destroyed in nci_unregister_device(), which
(I think) was called from virtual_ncidev_close() when syzbot close()d
an fd of virtual_ncidev.
The problem is that nci_unregister_device() destroys nci_dev.cmd_wq
first and then calls nfc_unregister_device(), which removes the
device from rfkill by rfkill_unregister().
So, the device is still visible via rfkill even after nci_dev.cmd_wq
is destroyed.
Let's unregister the device from rfkill first in nci_unregister_device().
Note that we cannot call nfc_unregister_device() before
nci_close_device() because
1) nfc_unregister_device() calls device_del() which frees
all memory allocated by devm_kzalloc() and linked to
ndev->conn_info_list
2) nci_rx_work() could try to queue nci_conn_info to
ndev->conn_info_list which could be leaked
Thus, nfc_unregister_device() is split into two functions so we
can remove rfkill interfaces only before nci_close_device().
[0]:
DEBUG_LOCKS_WARN_ON(1)
WARNING: kernel/locking/lockdep.c:238 at hlock_class kernel/locking/lockdep.c:238 [inline], CPU#0: syz.0.8675/6349
WARNING: kernel/locking/lockdep.c:238 at check_wait_context kernel/locking/lockdep.c:4854 [inline], CPU#0: syz.0.8675/6349
WARNING: kernel/locking/lockdep.c:238 at __lock_acquire+0x39d/0x2cf0 kernel/locking/lockdep.c:5187, CPU#0: syz.0.8675/6349
Modules linked in:
CPU: 0 UID: 0 PID: 6349 Comm: syz.0.8675 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/13/2026
RIP: 0010:hlock_class kernel/locking/lockdep.c:238 [inline]
RIP: 0010:check_wait_context kernel/locking/lockdep.c:4854 [inline]
RIP: 0010:__lock_acquire+0x3a4/0x2cf0 kernel/locking/lockdep.c:5187
Code: 18 00 4c 8b 74 24 08 75 27 90 e8 17 f2 fc 02 85 c0 74 1c 83 3d 50 e0 4e 0e 00 75 13 48 8d 3d 43 f7 51 0e 48 c7 c6 8b 3a de 8d <67> 48 0f b9 3a 90 31 c0 0f b6 98 c4 00 00 00 41 8b 45 20 25 ff 1f
RSP: 0018:ffffc9000c767680 EFLAGS: 00010046
RAX: 0000000000000001 RBX: 0000000000040000 RCX: 0000000000080000
RDX: ffffc90013080000 RSI: ffffffff8dde3a8b RDI: ffffffff8ff24ca0
RBP: 0000000000000003 R08: ffffffff8fef35a3 R09: 1ffffffff1fde6b4
R10: dffffc0000000000 R11: fffffbfff1fde6b5 R12: 00000000000012a2
R13: ffff888030338ba8 R14: ffff888030338000 R15: ffff888030338b30
FS: 00007fa5995f66c0(0000) GS:ffff8881256f8000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7e72f842d0 CR3: 00000000485a0000 CR4: 00000000003526f0
Call Trace:
<TASK>
lock_acquire+0x106/0x330 kernel/locking/lockdep.c:5868
touch_wq_lockdep_map+0xcb/0x180 kernel/workqueue.c:3940
__flush_workqueue+0x14b/0x14f0 kernel/workqueue.c:3982
nci_close_device+0x302/0x630 net/nfc/nci/core.c:567
nci_dev_down+0x3b/0x50 net/nfc/nci/core.c:639
nfc_dev_down+0x152/0x290 net/nfc/core.c:161
nfc_rfkill_set_block+0x2d/0x100 net/nfc/core.c:179
rfkill_set_block+0x1d2/0x440 net/rfkill/core.c:346
rfkill_fop_write+0x461/0x5a0 net/rfkill/core.c:1301
vfs_write+0x29a/0xb90 fs/read_write.c:684
ksys_write+0x150/0x270 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fa59b39acb9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fa5995f6028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007fa59b615fa0 RCX: 00007fa59b39acb9
RDX: 0000000000000008 RSI: 0000200000000080 RDI: 0000000000000007
RBP: 00007fa59b408bf7 R08:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
flex_proportions: make fprop_new_period() hardirq safe
Bernd has reported a lockdep splat from flexible proportions code that is
essentially complaining about the following race:
<timer fires>
run_timer_softirq - we are in softirq context
call_timer_fn
writeout_period
fprop_new_period
write_seqcount_begin(&p->sequence);
<hardirq is raised>
...
blk_mq_end_request()
blk_update_request()
ext4_end_bio()
folio_end_writeback()
__wb_writeout_add()
__fprop_add_percpu_max()
if (unlikely(max_frac < FPROP_FRAC_BASE)) {
fprop_fraction_percpu()
seq = read_seqcount_begin(&p->sequence);
- sees odd sequence so loops indefinitely
Note that a deadlock like this is only possible if the bdi has configured
maximum fraction of writeout throughput which is very rare in general but
frequent for example for FUSE bdis. To fix this problem we have to make
sure write section of the sequence counter is irqsafe. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Validate sp before freeing associated memory
System crash with the following signature
[154563.214890] nvme nvme2: NVME-FC{1}: controller connect complete
[154564.169363] qla2xxx [0000:b0:00.1]-3002:2: nvme: Sched: Set ZIO exchange threshold to 3.
[154564.169405] qla2xxx [0000:b0:00.1]-ffffff:2: SET ZIO Activity exchange threshold to 5.
[154565.539974] qla2xxx [0000:b0:00.1]-5013:2: RSCN database changed – 0078 0080 0000.
[154565.545744] qla2xxx [0000:b0:00.1]-5013:2: RSCN database changed – 0078 00a0 0000.
[154565.545857] qla2xxx [0000:b0:00.1]-11a2:2: FEC=enabled (data rate).
[154565.552760] qla2xxx [0000:b0:00.1]-11a2:2: FEC=enabled (data rate).
[154565.553079] BUG: kernel NULL pointer dereference, address: 00000000000000f8
[154565.553080] #PF: supervisor read access in kernel mode
[154565.553082] #PF: error_code(0x0000) - not-present page
[154565.553084] PGD 80000010488ab067 P4D 80000010488ab067 PUD 104978a067 PMD 0
[154565.553089] Oops: 0000 1 PREEMPT SMP PTI
[154565.553092] CPU: 10 PID: 858 Comm: qla2xxx_2_dpc Kdump: loaded Tainted: G OE ------- --- 5.14.0-503.11.1.el9_5.x86_64 #1
[154565.553096] Hardware name: HPE Synergy 660 Gen10/Synergy 660 Gen10 Compute Module, BIOS I43 09/30/2024
[154565.553097] RIP: 0010:qla_fab_async_scan.part.0+0x40b/0x870 [qla2xxx]
[154565.553141] Code: 00 00 e8 58 a3 ec d4 49 89 e9 ba 12 20 00 00 4c 89 e6 49 c7 c0 00 ee a8 c0 48 c7 c1 66 c0 a9 c0 bf 00 80 00 10 e8 15 69 00 00 <4c> 8b 8d f8 00 00 00 4d 85 c9 74 35 49 8b 84 24 00 19 00 00 48 8b
[154565.553143] RSP: 0018:ffffb4dbc8aebdd0 EFLAGS: 00010286
[154565.553145] RAX: 0000000000000000 RBX: ffff8ec2cf0908d0 RCX: 0000000000000002
[154565.553147] RDX: 0000000000000000 RSI: ffffffffc0a9c896 RDI: ffffb4dbc8aebd47
[154565.553148] RBP: 0000000000000000 R08: ffffb4dbc8aebd45 R09: 0000000000ffff0a
[154565.553150] R10: 0000000000000000 R11: 000000000000000f R12: ffff8ec2cf0908d0
[154565.553151] R13: ffff8ec2cf090900 R14: 0000000000000102 R15: ffff8ec2cf084000
[154565.553152] FS: 0000000000000000(0000) GS:ffff8ed27f800000(0000) knlGS:0000000000000000
[154565.553154] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[154565.553155] CR2: 00000000000000f8 CR3: 000000113ae0a005 CR4: 00000000007706f0
[154565.553157] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[154565.553158] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[154565.553159] PKRU: 55555554
[154565.553160] Call Trace:
[154565.553162] <TASK>
[154565.553165] ? show_trace_log_lvl+0x1c4/0x2df
[154565.553172] ? show_trace_log_lvl+0x1c4/0x2df
[154565.553177] ? qla_fab_async_scan.part.0+0x40b/0x870 [qla2xxx]
[154565.553215] ? __die_body.cold+0x8/0xd
[154565.553218] ? page_fault_oops+0x134/0x170
[154565.553223] ? snprintf+0x49/0x70
[154565.553229] ? exc_page_fault+0x62/0x150
[154565.553238] ? asm_exc_page_fault+0x22/0x30
Check for sp being non NULL before freeing any associated memory |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: Fix potential block overflow that cause system hang
When a user executes the FITRIM command, an underflow can occur when
calculating nblocks if end_block is too small. Since nblocks is of
type sector_t, which is u64, a negative nblocks value will become a
very large positive integer. This ultimately leads to the block layer
function __blkdev_issue_discard() taking an excessively long time to
process the bio chain, and the ns_segctor_sem lock remains held for a
long period. This prevents other tasks from acquiring the ns_segctor_sem
lock, resulting in the hang reported by syzbot in [1].
If the ending block is too small, typically if it is smaller than 4KiB
range, depending on the usage of the segment 0, it may be possible to
attempt a discard request beyond the device size causing the hang.
Exiting successfully and assign the discarded size (0 in this case)
to range->len.
Although the start and len values in the user input range are too small,
a conservative strategy is adopted here to safely ignore them, which is
equivalent to a no-op; it will not perform any trimming and will not
throw an error.
[1]
task:segctord state:D stack:28968 pid:6093 tgid:6093 ppid:2 task_flags:0x200040 flags:0x00080000
Call Trace:
rwbase_write_lock+0x3dd/0x750 kernel/locking/rwbase_rt.c:272
nilfs_transaction_lock+0x253/0x4c0 fs/nilfs2/segment.c:357
nilfs_segctor_thread_construct fs/nilfs2/segment.c:2569 [inline]
nilfs_segctor_thread+0x6ec/0xe00 fs/nilfs2/segment.c:2684
[ryusuke: corrected part of the commit message about the consequences] |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix race in mptcp_pm_nl_flush_addrs_doit()
syzbot and Eulgyu Kim reported crashes in mptcp_pm_nl_get_local_id()
and/or mptcp_pm_nl_is_backup()
Root cause is list_splice_init() in mptcp_pm_nl_flush_addrs_doit()
which is not RCU ready.
list_splice_init_rcu() can not be called here while holding pernet->lock
spinlock.
Many thanks to Eulgyu Kim for providing a repro and testing our patches. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imx/tve: fix probe device leak
Make sure to drop the reference taken to the DDC device during probe on
probe failure (e.g. probe deferral) and on driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Fix potential NULL pointer dereference in header processing
If siw_get_hdr() returns -EINVAL before set_rx_fpdu_context(),
qp->rx_fpdu can be NULL. The error path in siw_tcp_rx_data()
dereferences qp->rx_fpdu->more_ddp_segs without checking, which
may lead to a NULL pointer deref. Only check more_ddp_segs when
rx_fpdu is present.
KASAN splat:
[ 101.384271] KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7]
[ 101.385869] RIP: 0010:siw_tcp_rx_data+0x13ad/0x1e50 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/umad: Reject negative data_len in ib_umad_write
ib_umad_write computes data_len from user-controlled count and the
MAD header sizes. With a mismatched user MAD header size and RMPP
header length, data_len can become negative and reach ib_create_send_mad().
This can make the padding calculation exceed the segment size and trigger
an out-of-bounds memset in alloc_send_rmpp_list().
Add an explicit check to reject negative data_len before creating the
send buffer.
KASAN splat:
[ 211.363464] BUG: KASAN: slab-out-of-bounds in ib_create_send_mad+0xa01/0x11b0
[ 211.364077] Write of size 220 at addr ffff88800c3fa1f8 by task spray_thread/102
[ 211.365867] ib_create_send_mad+0xa01/0x11b0
[ 211.365887] ib_umad_write+0x853/0x1c80 |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: secure_seq: add back ports to TS offset
This reverts 28ee1b746f49 ("secure_seq: downgrade to per-host timestamp offsets")
tcp_tw_recycle went away in 2017.
Zhouyan Deng reported off-path TCP source port leakage via
SYN cookie side-channel that can be fixed in multiple ways.
One of them is to bring back TCP ports in TS offset randomization.
As a bonus, we perform a single siphash() computation
to provide both an ISN and a TS offset. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix infinite loop caused by next_smb2_rcv_hdr_off reset in error paths
The problem occurs when a signed request fails smb2 signature verification
check. In __process_request(), if check_sign_req() returns an error,
set_smb2_rsp_status(work, STATUS_ACCESS_DENIED) is called.
set_smb2_rsp_status() set work->next_smb2_rcv_hdr_off as zero. By resetting
next_smb2_rcv_hdr_off to zero, the pointer to the next command in the chain
is lost. Consequently, is_chained_smb2_message() continues to point to
the same request header instead of advancing. If the header's NextCommand
field is non-zero, the function returns true, causing __handle_ksmbd_work()
to repeatedly process the same failed request in an infinite loop.
This results in the kernel log being flooded with "bad smb2 signature"
messages and high CPU usage.
This patch fixes the issue by changing the return value from
SERVER_HANDLER_CONTINUE to SERVER_HANDLER_ABORT. This ensures that
the processing loop terminates immediately rather than attempting to
continue from an invalidated offset. |
| In the Linux kernel, the following vulnerability has been resolved:
igc: Reduce TSN TX packet buffer from 7KB to 5KB per queue
The previous 7 KB per queue caused TX unit hangs under heavy
timestamping load. Reducing to 5 KB avoids these hangs and matches
the TSN recommendation in I225/I226 SW User Manual Section 7.5.4.
The 8 KB "freed" by this change is currently unused. This reduction
is not expected to impact throughput, as the i226 is PCIe-limited
for small TSN packets rather than TX-buffer-limited. |
| In the Linux kernel, the following vulnerability has been resolved:
interconnect: debugfs: initialize src_node and dst_node to empty strings
The debugfs_create_str() API assumes that the string pointer is either NULL
or points to valid kmalloc() memory. Leaving the pointer uninitialized can
cause problems.
Initialize src_node and dst_node to empty strings before creating the
debugfs entries to guarantee that reads and writes are safe. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: annotate data-race in ndisc_router_discovery()
syzbot found that ndisc_router_discovery() could read and write
in6_dev->ra_mtu without holding a lock [1]
This looks fine, IFLA_INET6_RA_MTU is best effort.
Add READ_ONCE()/WRITE_ONCE() to document the race.
Note that we might also reject illegal MTU values
(mtu < IPV6_MIN_MTU || mtu > skb->dev->mtu) in a future patch.
[1]
BUG: KCSAN: data-race in ndisc_router_discovery / ndisc_router_discovery
read to 0xffff888119809c20 of 4 bytes by task 25817 on cpu 1:
ndisc_router_discovery+0x151d/0x1c90 net/ipv6/ndisc.c:1558
ndisc_rcv+0x2ad/0x3d0 net/ipv6/ndisc.c:1841
icmpv6_rcv+0xe5a/0x12f0 net/ipv6/icmp.c:989
ip6_protocol_deliver_rcu+0xb2a/0x10d0 net/ipv6/ip6_input.c:438
ip6_input_finish+0xf0/0x1d0 net/ipv6/ip6_input.c:489
NF_HOOK include/linux/netfilter.h:318 [inline]
ip6_input+0x5e/0x140 net/ipv6/ip6_input.c:500
ip6_mc_input+0x27c/0x470 net/ipv6/ip6_input.c:590
dst_input include/net/dst.h:474 [inline]
ip6_rcv_finish+0x336/0x340 net/ipv6/ip6_input.c:79
...
write to 0xffff888119809c20 of 4 bytes by task 25816 on cpu 0:
ndisc_router_discovery+0x155a/0x1c90 net/ipv6/ndisc.c:1559
ndisc_rcv+0x2ad/0x3d0 net/ipv6/ndisc.c:1841
icmpv6_rcv+0xe5a/0x12f0 net/ipv6/icmp.c:989
ip6_protocol_deliver_rcu+0xb2a/0x10d0 net/ipv6/ip6_input.c:438
ip6_input_finish+0xf0/0x1d0 net/ipv6/ip6_input.c:489
NF_HOOK include/linux/netfilter.h:318 [inline]
ip6_input+0x5e/0x140 net/ipv6/ip6_input.c:500
ip6_mc_input+0x27c/0x470 net/ipv6/ip6_input.c:590
dst_input include/net/dst.h:474 [inline]
ip6_rcv_finish+0x336/0x340 net/ipv6/ip6_input.c:79
...
value changed: 0x00000000 -> 0xe5400659 |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: move SCTP_CMD_ASSOC_SHKEY right after SCTP_CMD_PEER_INIT
A null-ptr-deref was reported in the SCTP transmit path when SCTP-AUTH key
initialization fails:
==================================================================
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
CPU: 0 PID: 16 Comm: ksoftirqd/0 Tainted: G W 6.6.0 #2
RIP: 0010:sctp_packet_bundle_auth net/sctp/output.c:264 [inline]
RIP: 0010:sctp_packet_append_chunk+0xb36/0x1260 net/sctp/output.c:401
Call Trace:
sctp_packet_transmit_chunk+0x31/0x250 net/sctp/output.c:189
sctp_outq_flush_data+0xa29/0x26d0 net/sctp/outqueue.c:1111
sctp_outq_flush+0xc80/0x1240 net/sctp/outqueue.c:1217
sctp_cmd_interpreter.isra.0+0x19a5/0x62c0 net/sctp/sm_sideeffect.c:1787
sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline]
sctp_do_sm+0x1a3/0x670 net/sctp/sm_sideeffect.c:1169
sctp_assoc_bh_rcv+0x33e/0x640 net/sctp/associola.c:1052
sctp_inq_push+0x1dd/0x280 net/sctp/inqueue.c:88
sctp_rcv+0x11ae/0x3100 net/sctp/input.c:243
sctp6_rcv+0x3d/0x60 net/sctp/ipv6.c:1127
The issue is triggered when sctp_auth_asoc_init_active_key() fails in
sctp_sf_do_5_1C_ack() while processing an INIT_ACK. In this case, the
command sequence is currently:
- SCTP_CMD_PEER_INIT
- SCTP_CMD_TIMER_STOP (T1_INIT)
- SCTP_CMD_TIMER_START (T1_COOKIE)
- SCTP_CMD_NEW_STATE (COOKIE_ECHOED)
- SCTP_CMD_ASSOC_SHKEY
- SCTP_CMD_GEN_COOKIE_ECHO
If SCTP_CMD_ASSOC_SHKEY fails, asoc->shkey remains NULL, while
asoc->peer.auth_capable and asoc->peer.peer_chunks have already been set by
SCTP_CMD_PEER_INIT. This allows a DATA chunk with auth = 1 and shkey = NULL
to be queued by sctp_datamsg_from_user().
Since command interpretation stops on failure, no COOKIE_ECHO should been
sent via SCTP_CMD_GEN_COOKIE_ECHO. However, the T1_COOKIE timer has already
been started, and it may enqueue a COOKIE_ECHO into the outqueue later. As
a result, the DATA chunk can be transmitted together with the COOKIE_ECHO
in sctp_outq_flush_data(), leading to the observed issue.
Similar to the other places where it calls sctp_auth_asoc_init_active_key()
right after sctp_process_init(), this patch moves the SCTP_CMD_ASSOC_SHKEY
immediately after SCTP_CMD_PEER_INIT, before stopping T1_INIT and starting
T1_COOKIE. This ensures that if shared key generation fails, authenticated
DATA cannot be sent. It also allows the T1_INIT timer to retransmit INIT,
giving the client another chance to process INIT_ACK and retry key setup. |
| In the Linux kernel, the following vulnerability has been resolved:
netdevsim: fix a race issue related to the operation on bpf_bound_progs list
The netdevsim driver lacks a protection mechanism for operations on the
bpf_bound_progs list. When the nsim_bpf_create_prog() performs
list_add_tail, it is possible that nsim_bpf_destroy_prog() is
simultaneously performs list_del. Concurrent operations on the list may
lead to list corruption and trigger a kernel crash as follows:
[ 417.290971] kernel BUG at lib/list_debug.c:62!
[ 417.290983] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 417.290992] CPU: 10 PID: 168 Comm: kworker/10:1 Kdump: loaded Not tainted 6.19.0-rc5 #1
[ 417.291003] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 417.291007] Workqueue: events bpf_prog_free_deferred
[ 417.291021] RIP: 0010:__list_del_entry_valid_or_report+0xa7/0xc0
[ 417.291034] Code: a8 ff 0f 0b 48 89 fe 48 89 ca 48 c7 c7 48 a1 eb ae e8 ed fb a8 ff 0f 0b 48 89 fe 48 89 c2 48 c7 c7 80 a1 eb ae e8 d9 fb a8 ff <0f> 0b 48 89 d1 48 c7 c7 d0 a1 eb ae 48 89 f2 48 89 c6 e8 c2 fb a8
[ 417.291040] RSP: 0018:ffffb16a40807df8 EFLAGS: 00010246
[ 417.291046] RAX: 000000000000006d RBX: ffff8e589866f500 RCX: 0000000000000000
[ 417.291051] RDX: 0000000000000000 RSI: ffff8e59f7b23180 RDI: ffff8e59f7b23180
[ 417.291055] RBP: ffffb16a412c9000 R08: 0000000000000000 R09: 0000000000000003
[ 417.291059] R10: ffffb16a40807c80 R11: ffffffffaf9edce8 R12: ffff8e594427ac20
[ 417.291063] R13: ffff8e59f7b44780 R14: ffff8e58800b7a05 R15: 0000000000000000
[ 417.291074] FS: 0000000000000000(0000) GS:ffff8e59f7b00000(0000) knlGS:0000000000000000
[ 417.291079] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 417.291083] CR2: 00007fc4083efe08 CR3: 00000001c3626006 CR4: 0000000000770ee0
[ 417.291088] PKRU: 55555554
[ 417.291091] Call Trace:
[ 417.291096] <TASK>
[ 417.291103] nsim_bpf_destroy_prog+0x31/0x80 [netdevsim]
[ 417.291154] __bpf_prog_offload_destroy+0x2a/0x80
[ 417.291163] bpf_prog_dev_bound_destroy+0x6f/0xb0
[ 417.291171] bpf_prog_free_deferred+0x18e/0x1a0
[ 417.291178] process_one_work+0x18a/0x3a0
[ 417.291188] worker_thread+0x27b/0x3a0
[ 417.291197] ? __pfx_worker_thread+0x10/0x10
[ 417.291207] kthread+0xe5/0x120
[ 417.291214] ? __pfx_kthread+0x10/0x10
[ 417.291221] ret_from_fork+0x31/0x50
[ 417.291230] ? __pfx_kthread+0x10/0x10
[ 417.291236] ret_from_fork_asm+0x1a/0x30
[ 417.291246] </TASK>
Add a mutex lock, to prevent simultaneous addition and deletion operations
on the list. |
| In the Linux kernel, the following vulnerability has been resolved:
bus: fsl-mc: fix use-after-free in driver_override_show()
The driver_override_show() function reads the driver_override string
without holding the device_lock. However, driver_override_store() uses
driver_set_override(), which modifies and frees the string while holding
the device_lock.
This can result in a concurrent use-after-free if the string is freed
by the store function while being read by the show function.
Fix this by holding the device_lock around the read operation. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix refcount warning on event->mmap_count increment
When calling refcount_inc(&event->mmap_count) inside perf_mmap_rb(), the
following warning is triggered:
refcount_t: addition on 0; use-after-free.
WARNING: lib/refcount.c:25
PoC:
struct perf_event_attr attr = {0};
int fd = syscall(__NR_perf_event_open, &attr, 0, -1, -1, 0);
mmap(NULL, 0x3000, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
int victim = syscall(__NR_perf_event_open, &attr, 0, -1, fd,
PERF_FLAG_FD_OUTPUT);
mmap(NULL, 0x3000, PROT_READ | PROT_WRITE, MAP_SHARED, victim, 0);
This occurs when creating a group member event with the flag
PERF_FLAG_FD_OUTPUT. The group leader should be mmap-ed and then mmap-ing
the event triggers the warning.
Since the event has copied the output_event in perf_event_set_output(),
event->rb is set. As a result, perf_mmap_rb() calls
refcount_inc(&event->mmap_count) when event->mmap_count = 0.
Disallow the case when event->mmap_count = 0. This also prevents two
events from updating the same user_page. |
