| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| UltraJSON is a fast JSON encoder and decoder written in pure C with bindings for Python 3.7+. Versions 5.10 through 5.11.0 are vulnerable to buffer overflow or infinite loop through large indent handling. ujson.dumps() crashes the Python interpreter (segmentation fault) when the product of the indent parameter and the nested depth of the input exceeds INT32_MAX. It can also get stuck in an infinite loop if the indent is a large negative number. Both are caused by an integer overflow/underflow whilst calculating how much memory to reserve for indentation. And both can be used to achieve denial of service. To be vulnerable, a service must call ujson.dump()/ujson.dumps()/ujson.encode() whilst giving untrusted users control over the indent parameter and not restrict that indentation to reasonably small non-negative values. A service may also be vulnerable to the infinite loop if it uses a fixed negative indent. An underflow always occurs for any negative indent when the input data is at least one level nested but, for small negative indents, the underflow is usually accidentally rectified by another overflow. This issue has been fixed in version 5.12.0. |
| UltraJSON is a fast JSON encoder and decoder written in pure C with bindings for Python 3.7+. Versions 5.4.0 through 5.11.0 contain an accumulating memory leak in JSON parsing large (outside of the range [-2^63, 2^64 - 1]) integers. The leaked memory is a copy of the string form of the integer plus an additional NULL byte. The leak occurs irrespective of whether the integer parses successfully or is rejected due to having more than sys.get_int_max_str_digits() digits, meaning that any sized leak per malicious JSON can be achieved provided that there is no limit on the overall size of the payload. Any service that calls ujson.load()/ujson.loads()/ujson.decode() on untrusted inputs is affected and vulnerable to denial of service attacks. This issue has been fixed in version 5.12.0. |
| ewe is a Gleam web server. Versions 0.8.0 through 3.0.4 contain a bug in the handle_trailers function where rejected trailer headers (forbidden or undeclared) cause an infinite loop. When handle_trailers encounters such a trailer, three code paths (lines 520, 523, 526) recurse with the original buffer (rest) instead of advancing past the rejected header (Buffer(header_rest, 0)), causing decoder.decode_packet to re-parse the same header on every iteration. The resulting loop has no timeout or escape — the BEAM process permanently wedges at 100% CPU. Any application that calls ewe.read_body on chunked requests is affected, and this is exploitable by any unauthenticated remote client before control returns to application code, making an application-level workaround impossible. This issue is fixed in version 3.0.5. |
| Admidio is an open-source user management solution. In versions 5.0.0 through 5.0.6, the documents and files module does not verify whether the current user has permission to delete folders or files. The folder_delete and file_delete action handlers in modules/documents-files.php only perform a VIEW authorization check (getFolderForDownload / getFileForDownload) before calling delete(), and they never validate a CSRF token. Because the target UUIDs are read from $_GET, deletion can be triggered by a plain HTTP GET request. When the module is in public mode (documents_files_module_enabled = 1) and a folder is marked public (fol_public = true), an unauthenticated attacker can permanently destroy the entire document library. Even when the module requires login, any user with view-only access can delete content they are only permitted to read. This issue has been fixed in version 5.0.7. |
| Admidio is an open-source user management solution. Versions 5.0.6 and below are vulnerable to arbitrary SQL Injection through the MyList configuration feature. The MyList configuration feature lets authenticated users define custom list column layouts, storing user-supplied column names, sort directions, and filter conditions in the adm_list_columns table via prepared statements. However, these stored values are later read back and interpolated directly into dynamically constructed SQL queries without sanitization or parameterization, creating a classic second-order SQL injection vulnerability (safe write, unsafe read). An attacker can exploit this to inject arbitrary SQL, potentially reading, modifying, or deleting any data in the database and achieving full database compromise. This issue has been fixed in version 5.0.7. |
| Admidio is an open-source user management solution. In versions 5.0.0 through 5.0.6, unrestricted URL fetch in the SSO Metadata API can result in SSRF and local file reads. The SSO Metadata fetch endpoint at modules/sso/fetch_metadata.php accepts an arbitrary URL via $_GET['url'], validates it only with PHP's FILTER_VALIDATE_URL, and passes it directly to file_get_contents(). FILTER_VALIDATE_URL accepts file://, http://, ftp://, data://, and php:// scheme URIs. An authenticated administrator can use this endpoint to read arbitrary local files via the file:// wrapper (Local File Read), reach internal services via http:// (SSRF), or fetch cloud instance metadata. The full response body is returned verbatim to the caller. This issue has been fixed in version 5.0.7. |
| Heimdall is a cloud native Identity Aware Proxy and Access Control Decision service. When using Heimdall in envoy gRPC decision API mode with versions 0.7.0-alpha through 0.17.10, wrong encoding of the query URL string allows rules with non-wildcard path expressions to be bypassed. Envoy splits the requested URL into parts, and sends the parts individually to Heimdall. Although query and path are present in the API, the query field is documented to be always empty and the URL query is included in the path field. The implementation uses go's url library to reconstruct the url which automatically encodes special characters in the path. As a consequence, a parameter like /mypath?foo=bar to Path is escaped into /mypath%3Ffoo=bar. Subsequently, a rule matching /mypath no longer matches and is bypassed. The issue can only lead to unintended access if Heimdall is configured with an "allow all" default rule. Since v0.16.0, Heimdall enforces secure defaults and refuses to start with such a configuration unless this enforcement is explicitly disabled, e.g. via --insecure-skip-secure-default-rule-enforcement or the broader --insecure flag. This issue has been fixed in version 0.17.11. |
| pyLoad is a free and open-source download manager written in Python. Versions before 0.5.0b3.dev97 are vulnerable to path traversal during password verification of certain encrypted 7z archives (encrypted files with non-encrypted headers), causing arbitrary file deletion outside of the extraction directory. During password verification, pyLoad derives an archive entry name from 7z listing output and treats it as a filesystem path without constraining it to the extraction directory. This issue has been fixed in version 0.5.0b3.dev97. |
| pydicom is a pure Python package for working with DICOM files. Versions 2.0.0-rc.1 through 3.0.1 are vulnerable to Path Traversal through a maliciously crafted DICOMDIR ReferencedFileID when it is set to a path outside the File-set root. pydicom resolves the path only to confirm that it exists, but does not verify that the resolved path remains under the File-set root. Subsequent public FileSet operations such as copy(), write(), and remove()+write(use_existing=True) use that unchecked path in file I/O operations. This allows arbitrary file read/copy and, in some flows, move/delete outside the File-set root. This issue has been fixed in version 3.0.2. |
| lz4_flex is a pure Rust implementation of LZ4 compression/decompression. In versions 0.11.5 and below, and 0.12.0, decompressing invalid LZ4 data can leak sensitive information from uninitialized memory or from previous decompression operations. The library fails to properly validate offset values during LZ4 "match copy operations," allowing out-of-bounds reads from the output buffer. The block-based API functions (`decompress_into`, `decompress_into_with_dict`, and others when `safe-decode` is disabled) are affected, while all frame APIs are unaffected. The impact is potential exposure of sensitive data and secrets through crafted or malformed LZ4 input. This issue has been fixed in versions 0.11.6 and 0.12.1. |
| Kargo manages and automates the promotion of software artifacts. In versions 1.4.0 through 1.6.3, 1.7.0-rc.1 through 1.7.8, 1.8.0-rc.1 through 1.8.11, and 1.9.0-rc.1 through 1.9.4, the http and http-download promotion steps allow Server-Side Request Forgery (SSRF) against link-local addresses, most critically the cloud instance metadata endpoint (169.254.169.254), enabling exfiltration of sensitive data such as IAM credentials. These steps provide full control over request headers and methods, rendering cloud provider header-based SSRF mitigations ineffective. An authenticated attacker with permissions to create/update Stages or craft Promotion resources can exploit this by submitting a malicious Promotion manifest, with response data retrievable via Promotion status fields, Git repositories, or a second http step. This issue has been fixed in versions 1.6.4, 1.7.9, 1.8.12 and 1.9.5. |
| The CTFer.io Monitoring component is in charge of the collection, process and storage of various signals (i.e. logs, metrics and distributed traces). In versions prior to 0.2.2, the sanitizeArchivePath function in pkg/extract/extract.go (lines 248–254) is vulnerable to Path Traversal due to a missing trailing path separator in the strings.HasPrefix check. The extractor allows arbitrary file writes (e.g., overwriting shell configs, SSH keys, kubeconfig, or crontabs), enabling RCE and persistent backdoors. The attack surface is further amplified by the default ReadWriteMany PVC access mode, which lets any pod in the cluster inject a malicious payload. This issue has been fixed in version 0.2.2. |
| Fullchain is an umbrella project for deploying a ready-to-use CTF platform. In versions prior to 0.1.1, due to a mis-written NetworkPolicy, a malicious actor can pivot from a subverted application to any Pod out of the origin namespace. The flawed inter-ns NetworkPolicy breaks the security-by-default property expected as part of the deployment program, leading to a potential lateral movement. This issue has been fixed in version 0.1.1. To workaround, delete the failing network policy that should be prefixed by inter-ns- in the target namespace. |
| SiYuan is a personal knowledge management system. Versions 3.6.0 and below contain an authorization bypass vulnerability in the /api/search/fullTextSearchBlock endpoint. When the method parameter is set to 2, the endpoint passes user-supplied input directly as a raw SQL statement to the underlying SQLite database without any authorization or read-only checks. This allows any authenticated user — including those with the Reader role — to execute arbitrary SQL statements (SELECT, DELETE, UPDATE, DROP TABLE, etc.) against the application's database. This is inconsistent with the application's own security model: the dedicated SQL endpoint (/api/query/sql) correctly requires both CheckAdminRole and CheckReadonly middleware, but the search endpoint bypasses these controls entirely. This issue has been fixed in version 3.6.1. |
| A flaw was found in the github.com/containers/image library. This flaw allows attackers to trigger unexpected authenticated registry accesses on behalf of a victim user, causing resource exhaustion, local path traversal, and other attacks. |
| SuiteCRM is an open-source, enterprise-ready Customer Relationship Management (CRM) software application. Prior to versions 7.15.1 and 8.9.3, an LDAP Injection vulnerability exists in the SuiteCRM authentication flow. The application fails to properly sanitize user-supplied input before embedding it into the LDAP search filter. By injecting LDAP control characters, an unauthenticated attacker can manipulate the query logic, which can lead to authentication bypass or information disclosure. Versions 7.15.1 and 8.9.3 patch the issue. |
| SuiteCRM is an open-source, enterprise-ready Customer Relationship Management (CRM) software application. Prior to versions 7.15.1 and 8.9.3, a SQL Injection vulnerability exists in the SuiteCRM authentication mechanisms when directory support is enabled. The application fails to properly sanitize the user-supplied username before using it in a local database query. An attacker with valid, low-privilege directory credentials can exploit this to execute arbitrary SQL commands, leading to complete privilege escalation (e.g., logging in as the CRM Administrator). Versions 7.15.1 and 8.9.3 patch the issue. |
| Xerte Online Toolkits versions 3.14 and earlier contain an unauthenticated arbitrary file upload vulnerability in the template import functionality. The issue exists in /website_code/php/import/import.php where missing authentication checks allow an attacker to upload a crafted ZIP archive disguised as a project template. The archive can contain a malicious PHP payload placed in the media/ directory, which is extracted into a web-accessible USER-FILES/{projectID}--{targetFolder}/ path. An attacker can then directly access the uploaded PHP file to achieve remote code execution under the web server context. |
| astral-tokio-tar is a tar archive reading/writing library for async Rust. In versions 0.5.6 and earlier, malformed PAX extensions were silently skipped when parsing tar archives. This silent skipping (rather than rejection) of invalid PAX extensions could be used as a building block for a parser differential, for example by silently skipping a malformed GNU “long link” extension so that a subsequent parser would misinterpret the extension. In practice, exploiting this behavior in astral-tokio-tar requires a secondary misbehaving tar parser, i.e. one that insufficiently validates malformed PAX extensions and interprets them rather than skipping or erroring on them. This vulnerability is considered low-severity as it requires a separate vulnerability against any unrelated tar parser. This issue has been fixed in version 0.6.0. |
| This repository is no longer public. |
