| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix dma_free_coherent() pointer
dma_alloc_coherent() allocates a DMA mapped buffer and stores the
addresses in XXX_unaligned fields. Those should be reused when freeing
the buffer rather than the aligned addresses. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: reset sparse-read state in osd_fault()
When a fault occurs, the connection is abandoned, reestablished, and any
pending operations are retried. The OSD client tracks the progress of a
sparse-read reply using a separate state machine, largely independent of
the messenger's state.
If a connection is lost mid-payload or the sparse-read state machine
returns an error, the sparse-read state is not reset. The OSD client
will then interpret the beginning of a new reply as the continuation of
the old one. If this makes the sparse-read machinery enter a failure
state, it may never recover, producing loops like:
libceph: [0] got 0 extents
libceph: data len 142248331 != extent len 0
libceph: osd0 (1)...:6801 socket error on read
libceph: data len 142248331 != extent len 0
libceph: osd0 (1)...:6801 socket error on read
Therefore, reset the sparse-read state in osd_fault(), ensuring retries
start from a clean state. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Add recursion protection in kernel stack trace recording
A bug was reported about an infinite recursion caused by tracing the rcu
events with the kernel stack trace trigger enabled. The stack trace code
called back into RCU which then called the stack trace again.
Expand the ftrace recursion protection to add a set of bits to protect
events from recursion. Each bit represents the context that the event is
in (normal, softirq, interrupt and NMI).
Have the stack trace code use the interrupt context to protect against
recursion.
Note, the bug showed an issue in both the RCU code as well as the tracing
stacktrace code. This only handles the tracing stack trace side of the
bug. The RCU fix will be handled separately. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conncount: update last_gc only when GC has been performed
Currently last_gc is being updated everytime a new connection is
tracked, that means that it is updated even if a GC wasn't performed.
With a sufficiently high packet rate, it is possible to always bypass
the GC, causing the list to grow infinitely.
Update the last_gc value only when a GC has been actually performed. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, test_run: Subtract size of xdp_frame from allowed metadata size
The xdp_frame structure takes up part of the XDP frame headroom,
limiting the size of the metadata. However, in bpf_test_run, we don't
take this into account, which makes it possible for userspace to supply
a metadata size that is too large (taking up the entire headroom).
If userspace supplies such a large metadata size in live packet mode,
the xdp_update_frame_from_buff() call in xdp_test_run_init_page() call
will fail, after which packet transmission proceeds with an
uninitialised frame structure, leading to the usual Bad Stuff.
The commit in the Fixes tag fixed a related bug where the second check
in xdp_update_frame_from_buff() could fail, but did not add any
additional constraints on the metadata size. Complete the fix by adding
an additional check on the metadata size. Reorder the checks slightly to
make the logic clearer and add a comment. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: send: check for inline extents in range_is_hole_in_parent()
Before accessing the disk_bytenr field of a file extent item we need
to check if we are dealing with an inline extent.
This is because for inline extents their data starts at the offset of
the disk_bytenr field. So accessing the disk_bytenr
means we are accessing inline data or in case the inline data is less
than 8 bytes we can actually cause an invalid
memory access if this inline extent item is the first item in the leaf
or access metadata from other items. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs-scheme: cleanup access_pattern subdirs on scheme dir setup failure
When a DAMOS-scheme DAMON sysfs directory setup fails after setup of
access_pattern/ directory, subdirectories of access_pattern/ directory are
not cleaned up. As a result, DAMON sysfs interface is nearly broken until
the system reboots, and the memory for the unremoved directory is leaked.
Cleanup the directories under such failures. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: Fix misalignment bug in struct virtnet_info
Use the new TRAILING_OVERLAP() helper to fix a misalignment bug
along with the following warning:
drivers/net/virtio_net.c:429:46: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
This helper creates a union between a flexible-array member (FAM)
and a set of members that would otherwise follow it (in this case
`u8 rss_hash_key_data[VIRTIO_NET_RSS_MAX_KEY_SIZE];`). This
overlays the trailing members (rss_hash_key_data) onto the FAM
(hash_key_data) while keeping the FAM and the start of MEMBERS aligned.
The static_assert() ensures this alignment remains.
Notice that due to tail padding in flexible `struct
virtio_net_rss_config_trailer`, `rss_trailer.hash_key_data`
(at offset 83 in struct virtnet_info) and `rss_hash_key_data` (at
offset 84 in struct virtnet_info) are misaligned by one byte. See
below:
struct virtio_net_rss_config_trailer {
__le16 max_tx_vq; /* 0 2 */
__u8 hash_key_length; /* 2 1 */
__u8 hash_key_data[]; /* 3 0 */
/* size: 4, cachelines: 1, members: 3 */
/* padding: 1 */
/* last cacheline: 4 bytes */
};
struct virtnet_info {
...
struct virtio_net_rss_config_trailer rss_trailer; /* 80 4 */
/* XXX last struct has 1 byte of padding */
u8 rss_hash_key_data[40]; /* 84 40 */
...
/* size: 832, cachelines: 13, members: 48 */
/* sum members: 801, holes: 8, sum holes: 31 */
/* paddings: 2, sum paddings: 5 */
};
After changes, those members are correctly aligned at offset 795:
struct virtnet_info {
...
union {
struct virtio_net_rss_config_trailer rss_trailer; /* 792 4 */
struct {
unsigned char __offset_to_hash_key_data[3]; /* 792 3 */
u8 rss_hash_key_data[40]; /* 795 40 */
}; /* 792 43 */
}; /* 792 44 */
...
/* size: 840, cachelines: 14, members: 47 */
/* sum members: 801, holes: 8, sum holes: 35 */
/* padding: 4 */
/* paddings: 1, sum paddings: 4 */
/* last cacheline: 8 bytes */
};
As a result, the RSS key passed to the device is shifted by 1
byte: the last byte is cut off, and instead a (possibly
uninitialized) byte is added at the beginning.
As a last note `struct virtio_net_rss_config_hdr *rss_hdr;` is also
moved to the end, since it seems those three members should stick
around together. :) |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs: cleanup attrs subdirs on context dir setup failure
When a context DAMON sysfs directory setup is failed after setup of attrs/
directory, subdirectories of attrs/ directory are not cleaned up. As a
result, DAMON sysfs interface is nearly broken until the system reboots,
and the memory for the unremoved directory is leaked.
Cleanup the directories under such failures. |
| In the Linux kernel, the following vulnerability has been resolved:
drm: Do not allow userspace to trigger kernel warnings in drm_gem_change_handle_ioctl()
Since GEM bo handles are u32 in the uapi and the internal implementation
uses idr_alloc() which uses int ranges, passing a new handle larger than
INT_MAX trivially triggers a kernel warning:
idr_alloc():
...
if (WARN_ON_ONCE(start < 0))
return -EINVAL;
...
Fix it by rejecting new handles above INT_MAX and at the same time make
the end limit calculation more obvious by moving into int domain. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: correctly decode TTLM with default link map
TID-To-Link Mapping (TTLM) elements do not contain any link mapping
presence indicator if a default mapping is used and parsing needs to be
skipped.
Note that access points should not explicitly report an advertised TTLM
with a default mapping as that is the implied mapping if the element is
not included, this is even the case when switching back to the default
mapping. However, mac80211 would incorrectly parse the frame and would
also read one byte beyond the end of the element. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3-its: Avoid truncating memory addresses
On 32-bit machines with CONFIG_ARM_LPAE, it is possible for lowmem
allocations to be backed by addresses physical memory above the 32-bit
address limit, as found while experimenting with larger VMSPLIT
configurations.
This caused the qemu virt model to crash in the GICv3 driver, which
allocates the 'itt' object using GFP_KERNEL. Since all memory below
the 4GB physical address limit is in ZONE_DMA in this configuration,
kmalloc() defaults to higher addresses for ZONE_NORMAL, and the
ITS driver stores the physical address in a 32-bit 'unsigned long'
variable.
Change the itt_addr variable to the correct phys_addr_t type instead,
along with all other variables in this driver that hold a physical
address.
The gicv5 driver correctly uses u64 variables, while all other irqchip
drivers don't call virt_to_phys or similar interfaces. It's expected that
other device drivers have similar issues, but fixing this one is
sufficient for booting a virtio based guest. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: cap TX credit to local buffer size
The virtio transports derives its TX credit directly from peer_buf_alloc,
which is set from the remote endpoint's SO_VM_SOCKETS_BUFFER_SIZE value.
On the host side this means that the amount of data we are willing to
queue for a connection is scaled by a guest-chosen buffer size, rather
than the host's own vsock configuration. A malicious guest can advertise
a large buffer and read slowly, causing the host to allocate a
correspondingly large amount of sk_buff memory.
The same thing would happen in the guest with a malicious host, since
virtio transports share the same code base.
Introduce a small helper, virtio_transport_tx_buf_size(), that
returns min(peer_buf_alloc, buf_alloc), and use it wherever we consume
peer_buf_alloc.
This ensures the effective TX window is bounded by both the peer's
advertised buffer and our own buf_alloc (already clamped to
buffer_max_size via SO_VM_SOCKETS_BUFFER_MAX_SIZE), so a remote peer
cannot force the other to queue more data than allowed by its own
vsock settings.
On an unpatched Ubuntu 22.04 host (~64 GiB RAM), running a PoC with
32 guest vsock connections advertising 2 GiB each and reading slowly
drove Slab/SUnreclaim from ~0.5 GiB to ~57 GiB; the system only
recovered after killing the QEMU process. That said, if QEMU memory is
limited with cgroups, the maximum memory used will be limited.
With this patch applied:
Before:
MemFree: ~61.6 GiB
Slab: ~142 MiB
SUnreclaim: ~117 MiB
After 32 high-credit connections:
MemFree: ~61.5 GiB
Slab: ~178 MiB
SUnreclaim: ~152 MiB
Only ~35 MiB increase in Slab/SUnreclaim, no host OOM, and the guest
remains responsive.
Compatibility with non-virtio transports:
- VMCI uses the AF_VSOCK buffer knobs to size its queue pairs per
socket based on the local vsk->buffer_* values; the remote side
cannot enlarge those queues beyond what the local endpoint
configured.
- Hyper-V's vsock transport uses fixed-size VMBus ring buffers and
an MTU bound; there is no peer-controlled credit field comparable
to peer_buf_alloc, and the remote endpoint cannot drive in-flight
kernel memory above those ring sizes.
- The loopback path reuses virtio_transport_common.c, so it
naturally follows the same semantics as the virtio transport.
This change is limited to virtio_transport_common.c and thus affects
virtio-vsock, vhost-vsock, and loopback, bringing them in line with the
"remote window intersected with local policy" behaviour that VMCI and
Hyper-V already effectively have.
[Stefano: small adjustments after changing the previous patch]
[Stefano: tweak the commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: smbd: fix dma_unmap_sg() nents
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned. |
| In the Linux kernel, the following vulnerability has been resolved:
uacce: fix isolate sysfs check condition
uacce supports the device isolation feature. If the driver
implements the isolate_err_threshold_read and
isolate_err_threshold_write callback functions, uacce will create
sysfs files now. Users can read and configure the isolation policy
through sysfs. Currently, sysfs files are created as long as either
isolate_err_threshold_read or isolate_err_threshold_write callback
functions are present.
However, accessing a non-existent callback function may cause the
system to crash. Therefore, intercept the creation of sysfs if
neither read nor write exists; create sysfs if either is supported,
but intercept unsupported operations at the call site. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 15.5 before 18.7.6, 18.8 before 18.8.6, and 18.9 before 18.9.2 that could have allowed an authenticated user with maintainer-role permissions to reveal Datadog API credentials under certain conditions. |
| Open Forms allows users create and publish smart forms. Prior to 3.3.13 and 3.4.5, to be able to cosign, the cosigner receives an e-mail with instructions or a deep-link to start the cosign flow. The submission reference is communicated so that the user can retrieve the submission to be cosigned. Attackers can guess a code or modify the received code to look up arbitrary submissions, after logging in (with DigiD/eHerkenning/... depending on form configuration). This vulnerability is fixed in 3.3.13 and 3.4.5. |
| Inappropriate user token revocation due to a logic error in the token revocation endpoint implementation in Cloudfoundry UAA v77.30.0 to v78.7.0 and in Cloudfoundry Deployment v48.7.0 to v54.10.0. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "net/mlx5: Block entering switchdev mode with ns inconsistency"
This reverts commit 662404b24a4c4d839839ed25e3097571f5938b9b.
The revert is required due to the suspicion it is not good for anything
and cause crash. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: set correct id, uid and cruid for multiuser automounts
When uid, gid and cruid are not specified, we need to dynamically
set them into the filesystem context used for automounting otherwise
they'll end up reusing the values from the parent mount. |
