| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-core: fix wrong reinitialization of ringbuffer on reopen
dvb_dvr_open() calls dvb_ringbuffer_init() when a new reader opens the
DVR device. dvb_ringbuffer_init() calls init_waitqueue_head(), which
reinitializes the waitqueue list head to empty.
Since dmxdev->dvr_buffer.queue is a shared waitqueue (all opens of the
same DVR device share it), this orphans any existing waitqueue entries
from io_uring poll or epoll, leaving them with stale prev/next pointers
while the list head is reset to {self, self}.
The waitqueue and spinlock in dvr_buffer are already properly
initialized once in dvb_dmxdev_init(). The open path only needs to
reset the buffer data pointer, size, and read/write positions.
Replace the dvb_ringbuffer_init() call in dvb_dvr_open() with direct
assignment of data/size and a call to dvb_ringbuffer_reset(), which
properly resets pread, pwrite, and error with correct memory ordering
without touching the waitqueue or spinlock. |
| In the Linux kernel, the following vulnerability has been resolved:
net: gro: fix outer network offset
The udp GRO complete stage assumes that all the packets inserted the RX
have the `encapsulation` flag zeroed. Such assumption is not true, as a
few H/W NICs can set such flag when H/W offloading the checksum for
an UDP encapsulated traffic, the tun driver can inject GSO packets with
UDP encapsulation and the problematic layout can also be created via
a veth based setup.
Due to the above, in the problematic scenarios, udp4_gro_complete() uses
the wrong network offset (inner instead of outer) to compute the outer
UDP header pseudo checksum, leading to csum validation errors later on
in packet processing.
Address the issue always clearing the encapsulation flag at GRO completion
time. Such flag will be set again as needed for encapsulated packets by
udp_gro_complete(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: add proper RCU protection to /proc/net/ptype
Yin Fengwei reported an RCU stall in ptype_seq_show() and provided
a patch.
Real issue is that ptype_seq_next() and ptype_seq_show() violate
RCU rules.
ptype_seq_show() runs under rcu_read_lock(), and reads pt->dev
to get device name without any barrier.
At the same time, concurrent writers can remove a packet_type structure
(which is correctly freed after an RCU grace period) and clear pt->dev
without an RCU grace period.
Define ptype_iter_state to carry a dev pointer along seq_net_private:
struct ptype_iter_state {
struct seq_net_private p;
struct net_device *dev; // added in this patch
};
We need to record the device pointer in ptype_get_idx() and
ptype_seq_next() so that ptype_seq_show() is safe against
concurrent pt->dev changes.
We also need to add full RCU protection in ptype_seq_next().
(Missing READ_ONCE() when reading list.next values)
Many thanks to Dong Chenchen for providing a repro. |
| In the Linux kernel, the following vulnerability has been resolved:
net: liquidio: Fix off-by-one error in PF setup_nic_devices() cleanup
In setup_nic_devices(), the initialization loop jumps to the label
setup_nic_dev_free on failure. The current cleanup loop while(i--)
skip the failing index i, causing a memory leak.
Fix this by changing the loop to iterate from the current index i
down to 0.
Also, decrement i in the devlink_alloc failure path to point to the
last successfully allocated index.
Compile tested only. Issue found using code review. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: Fix stats report corruption on queue count change
The driver and the NIC share a region in memory for stats reporting.
The NIC calculates its offset into this region based on the total size
of the stats region and the size of the NIC's stats.
When the number of queues is changed, the driver's stats region is
resized. If the queue count is increased, the NIC can write past
the end of the allocated stats region, causing memory corruption.
If the queue count is decreased, there is a gap between the driver
and NIC stats, leading to incorrect stats reporting.
This change fixes the issue by allocating stats region with maximum
size, and the offset calculation for NIC stats is changed to match
with the calculation of the NIC. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "drm/amd: Check if ASPM is enabled from PCIe subsystem"
This reverts commit 7294863a6f01248d72b61d38478978d638641bee.
This commit was erroneously applied again after commit 0ab5d711ec74
("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device")
removed it, leading to very hard to debug crashes, when used with a system with two
AMD GPUs of which only one supports ASPM.
(cherry picked from commit 97a9689300eb2b393ba5efc17c8e5db835917080) |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix unprivileged local user can do privileged policy management
An unprivileged local user can load, replace, and remove profiles by
opening the apparmorfs interfaces, via a confused deputy attack, by
passing the opened fd to a privileged process, and getting the
privileged process to write to the interface.
This does require a privileged target that can be manipulated to do
the write for the unprivileged process, but once such access is
achieved full policy management is possible and all the possible
implications that implies: removing confinement, DoS of system or
target applications by denying all execution, by-passing the
unprivileged user namespace restriction, to exploiting kernel bugs for
a local privilege escalation.
The policy management interface can not have its permissions simply
changed from 0666 to 0600 because non-root processes need to be able
to load policy to different policy namespaces.
Instead ensure the task writing the interface has privileges that
are a subset of the task that opened the interface. This is already
done via policy for confined processes, but unconfined can delegate
access to the opened fd, by-passing the usual policy check. |
| The "Privileged Helper" component of the Arturia Software Center (MacOS) does not perform sufficient client code signature validation when a client connects. This leads to an attacker being able to connect to the helper and execute privileged actions leading to local privilege escalation. |
| When a plugin is installed using the Arturia Software Center (MacOS), it also installs an uninstall.sh bash script in a root owned path. This script is written to disk with the file permissions 777, meaning it is writable by any user. When uninstalling a plugin via the Arturia Software Center the Privileged Helper gets instructed to execute this script. When the bash script is manipulated by an attacker this scenario will lead to privilege escalation. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in QantumThemes Kentha allows Reflected XSS.This issue affects Kentha: from n/a through 4.7.2. |
| The Post SMTP plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the `handle_office365_oauth_redirect()` function in all versions up to, and including, 3.8.0. This is due to the function being hooked to `admin_init` without any `current_user_can()` check or nonce verification. This makes it possible for authenticated attackers, with Subscriber-level access and above, to overwrite the site's Office 365 OAuth mail configuration (access token, refresh token, and user email) via a crafted URL. The configuration option is used during wizard setup of Microsoft365 SMTP, only available in the Pro option of the plugin. This could cause an Administrator to believe an attacker-controlled Azure app is their own, and lead them to connect the plugin to the attacker's account during configuration after upgrading to Pro. |
| Buffer Overflow vulnerability in giflib v.5.2.2 allows a remote attacker to cause a denial of service via the EGifGCBToExtension overwriting an existing Graphic Control Extension block without validating its allocated size. |
| Dell Integrated Dell Remote Access Controller 9, 14G versions prior to 7.00.00.181, 15G and 16G versions prior to 7.20.10.50 and Dell Integrated Dell Remote Access Controller 10, 17G versions prior to 1.20.25.00, contain a Process Control vulnerability. A high privileged attacker with adjacent network access could potentially exploit this vulnerability, leading to code execution. |
| The KiviCare – Clinic & Patient Management System (EHR) plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 4.1.2. This is due to the `patientSocialLogin()` function not verifying the social provider access token before authenticating a user. This makes it possible for unauthenticated attackers to log in as any patient registered on the system by providing only their email address and an arbitrary value for the access token, bypassing all credential verification. The attacker gains access to sensitive medical records, appointments, prescriptions, and billing information (PII/PHI breach). Additionally, authentication cookies are set before the role check, meaning the auth cookies for non-patient users (including administrators) are also set in the HTTP response headers, even though a 403 response is returned. |
| The KiviCare – Clinic & Patient Management System (EHR) plugin for WordPress is vulnerable to Privilege Escalation due to missing authorization on the `/wp-json/kivicare/v1/setup-wizard/clinic` REST API endpoint in all versions up to, and including, 4.1.2. This makes it possible for unauthenticated attackers to create a new clinic and a WordPress user with clinic admin privileges. |
| nghttp2 is an implementation of the Hypertext Transfer Protocol version 2 in C. Prior to version 1.68.1, the nghttp2 library stops reading the incoming data when user facing public API `nghttp2_session_terminate_session` or `nghttp2_session_terminate_session2` is called by the application. They might be called internally by the library when it detects the situation that is subject to connection error. Due to the missing internal state validation, the library keeps reading the rest of the data after one of those APIs is called. Then receiving a malformed frame that causes FRAME_SIZE_ERROR causes assertion failure. nghttp2 v1.68.1 adds missing state validation to avoid assertion failure. No known workarounds are available. |
| The web interface of the WiFi Extender WDR201A (HW V2.1, FW LFMZX28040922V1.02) contains hardcoded credential disclosure mechanisms (in the form of Server Side Include) within multiple server-side web pages, including login.shtml and settings.shtml. These pages embed server-side execution directives that dynamically retrieve and expose the web administration password from non-volatile memory at runtime. |
| Dell Integrated Dell Remote Access Controller 9, 14G versions prior to 7.00.00.174, 15G and 16G versions prior to 7.10.90.00, contain an Exposure of Sensitive System Information Due to Uncleared Debug Information vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to information disclosure. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: check return value of xchk_scrub_create_subord
Fix this function to return NULL instead of a mangled ENOMEM, then fix
the callers to actually check for a null pointer and return ENOMEM.
Most of the corrections here are for code merged between 6.2 and 6.10. |
| A command injection vulnerability exists in the web management interface of the WiFi Extender WDR201A (HW V2.1, FW LFMZX28040922V1.02). The adm.cgi endpoint improperly sanitizes user-supplied input provided to a command-related parameter in the sysCMD functionality. |
