| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| EVerest is an EV charging software stack. In versions up to and including 2025.12.1, it is possible to bypass the sequence state verification including authentication, and send requests that transition to forbidden states relative to the current one, thereby updating the current context with illegitimate data.cThanks to the modular design of EVerest, authorization is handled in a separate module and EVSEManager Charger internal state machine cannot transition out of the `WaitingForAuthentication` state through ISO 15118-2 communication. From this state, it was however possible through ISO 15118-2 messages which are published to the MQTT server to trick it into preparing to charge, and even to prepare to send current. The final requirement to actually send current to the EV was the closure of the contactors, which does not appear to be possible without leaving the `WaitingForAuthentication` state and leveraging ISO 15118-2 messages. As of time of publication, no fixed versions are available. |
| EVerest is an EV charging software stack, and EVerest libocpp is a C++ implementation of the Open Charge Point Protocol. In libocpp prior to version 0.30.1, pointers returned by the `strdup` calls are never freed. At each connection attempt, the newly allocated memory area will be leaked, potentially causing memory exhaustion and denial of service. Version 0.30.1 fixes the issue. |
| EVerest is an EV charging software stack. In all versions up to and including 2025.12.1, the default value for `terminate_connection_on_failed_response` is `False`, which leaves the responsibility for session and connection termination to the EV. In this configuration, any errors encountered by the module are logged but do not trigger countermeasures such as session and connection reset or termination. This could be abused by a malicious user in order to exploit other weaknesses or vulnerabilities. While the default will stay at the setting that is described as potentially problematic in this reported issue, a mitigation is available by changing the `terminate_connection_on_failed_response` setting to `true`. However this cannot be set to this value by default since it can trigger errors in vehicle ECUs requiring ECU resets and lengthy unavailability in charging for vehicles. The maintainers judge this to be a much more important workaround then short-term unavailability of an EVSE, therefore this setting will stay at the current value. |
| EVerest is an EV charging software stack. Prior to version 2025.9.0, once the validity of the received V2G message has been verified, it is checked whether the submitted session ID matches the registered one. However, if no session has been registered, the default value is 0. Therefore, a message submitted with a session ID of 0 is accepted, as it matches the registered value. This could allow unauthorized and anonymous indirect emission of MQTT messages and communication with V2G messages handlers, updating a session context. Version 2025.9.0 fixes the issue. |
| EVerest is an EV charging software stack. Prior to version 2025.10.0, during the deserialization of a `DC_ChargeLoopRes` message that includes Receipt as well as TaxCosts, the vector `<DetailedTax>tax_costs` in the target `Receipt` structure is accessed out of bounds. This occurs in the method `template <> void convert(const struct iso20_dc_DetailedTaxType& in, datatypes::DetailedTax& out)` which leads to a null pointer dereference and causes the module to terminate. The EVerest processes and all its modules shut down, affecting all EVSE. Version 2025.10.0 fixes the issue. |
| EVerest is an EV charging software stack. Prior to version 2025.9.0, in several places, integer values are concatenated to literal strings when throwing errors. This results in pointers arithmetic instead of printing the integer value as expected, like most of interpreted languages. This can be used by malicious operator to read unintended memory regions, including the heap and the stack. Version 2025.9.0 fixes the issue. |
| EVerest is an EV charging software stack. Prior to version 2025.10.0, an integer overflow occurring in `SdpPacket::parse_header()` allows the current buffer length to be set to 7 after a complete header of size 8 has been read. The remaining length to read is computed using the current length subtracted by the header length which results in a negative value. This value is then interpreted as `SIZE_MAX` (or slightly less) because the expected type of the argument is `size_t`. Depending on whether the server is plain TCP or TLS, this leads to either an infinite loop or a stack buffer overflow. Version 2025.10.0 fixes the issue. |
| EVerest is an EV charging software stack. Prior to version 2025.10.0, once the module receives a SDP request, it creates a whole new set of objects like `Session`, `IConnection` which open new TCP socket for the ISO15118-20 communications and registers callbacks for the created file descriptor, without closing and destroying the previous ones. Previous `Session` is not saved and the usage of an `unique_ptr` is lost, destroying connection data. Latter, if the used socket and therefore file descriptor is not the last one, it will lead to a null pointer dereference. Version 2025.10.0 fixes the issue. |
| EVerest is an EV charging software stack. Prior to version 2025.10.0, C++ exceptions are not properly handled for and by the `TbdController` loop, leading to its caller and itself to silently terminates. Thus, this leads to a denial of service as it is responsible of SDP and ISO15118-20 servers. Version 2025.10.0 fixes the issue. |
| EVerest is an EV charging software stack. Prior to version 2025.10.0, the use of the `assert` function to handle errors frequently causes the module to crash. This is particularly critical because the manager shuts down all other modules and exits when any one of them terminates, leading to a denial of service. In a context where a manager handles multiple EVSE, this would also impact other users. Version 2025.10.0 fixes the issue. |
| EVerest is an EV charging software stack. In versions 2025.9.0 and below, an attacker can exhaust the operating system's memory and cause the module to terminate by initiating an unlimited number of TCP connections that never proceed to ISO 15118-2 communication. This is possible because a new thread is started for each incoming plain TCP or TLS socket connection before any verification occurs, and the verification performed is too permissive. The EVerest processes and all its modules shut down, affecting all EVSE functionality. This issue is fixed in version 2025.10.0. |
| EVerest is an EV charging software stack. Prior to version 2025.12.0, `is_message_crc_correct` in the DZG_GSH01 powermeter SLIP parser reads `vec[vec.size()-1]` and `vec[vec.size()-2]` without checking that at least two bytes are present. Malformed SLIP frames on the serial link can reach `is_message_crc_correct` with `vec.size() < 2` (only via the multi-message path), causing an out-of-bounds read before CRC verification and `pop_back` underflow. Therefore, an attacker controlling the serial input can reliably crash the process. Version 2025.12.0 fixes the issue. |
| Rekor is a software supply chain transparency log. In versions 1.4.3 and below, attackers can trigger SSRF to arbitrary internal services because /api/v1/index/retrieve supports retrieving a public key via user-provided URL. Since the SSRF only can trigger GET requests, the request cannot mutate state. The response from the GET request is not returned to the caller so data exfiltration is not possible. A malicious actor could attempt to probe an internal network through Blind SSRF. The issue has been fixed in version 1.5.0. To workaround this issue, disable the search endpoint with --enable_retrieve_api=false. |
| Rekor is a software supply chain transparency log. In versions 1.4.3 and below, the entry implementation can panic on attacker-controlled input when canonicalizing a proposed entry with an empty spec.message, causing nil Pointer Dereference. Function validate() returns nil (success) when message is empty, leaving sign1Msg uninitialized, and Canonicalize() later dereferences v.sign1Msg.Payload. A malformed proposed entry of the cose/v0.0.1 type can cause a panic on a thread within the Rekor process. The thread is recovered so the client receives a 500 error message and service still continues, so the availability impact of this is minimal. This issue has been fixed in version 1.5.0. |
| In aee daemon, there is a possible system crash due to a race condition. This could lead to local denial of service if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10190802; Issue ID: MSV-4833. |
| In Bluetooth firmware, there is a possible firmware asssert due to improper handling of exceptional conditions. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS09001270; Issue ID: MSV-1600. |
| In wlan STA, there is a possible way to trick a client to connect to an AP with spoofed SSID. This could lead to remote information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS08990446 / ALPS09057442; Issue ID: MSV-1598. |
| A denial-of-service vulnerability exists in the omec-project UPF (pfcpiface component) in version upf-epc-pfcpiface:2.1.3-dev. When the UPF receives a PFCP Session Report Response that is missing the mandatory Cause Information Element, the session report handler dereferences a nil pointer instead of rejecting the malformed message. This triggers a panic and terminates the UPF process. An attacker who can send PFCP Session Report Response messages to the UPF's N4/PFCP endpoint can exploit this flaw to repeatedly crash the UPF and disrupt user-plane services. |
| An issue was discovered in PyTorch v2.5 and v2.7.1. Omission of profiler.stop() can cause torch.profiler.profile (PythonTracer) to crash or hang during finalization, leading to a Denial of Service (DoS). |
| containerd is an open-source container runtime. Versions 1.7.28 and below, 2.0.0-beta.0 through 2.0.6, 2.1.0-beta.0 through 2.1.4, and 2.2.0-beta.0 through 2.2.0-rc.1 contain a bug in the CRI Attach implementation where a user can exhaust memory on the host due to goroutine leaks. This issue is fixed in versions 1.7.29, 2.0.7, 2.1.5 and 2.2.0. To workaround this vulnerability, users can set up an admission controller to control accesses to pods/attach resources. |
