| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenCTI is an open source platform for managing cyber threat intelligence knowledge and observables. Prior to version 6.9.1, the GraphQL mutations "IndividualDeletionDeleteMutation" is intended to allow users to delete individual entity objects respectively. However, it was observed that this mutation can be misused to delete unrelated and sensitive objects such as analyses reports etc. This behavior stems from the lack of validation in the API to ensure that the targeted object is contextually related to the mutation being executed. Version 6.9.1 fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
leds: led-class: Only Add LED to leds_list when it is fully ready
Before this change the LED was added to leds_list before led_init_core()
gets called adding it the list before led_classdev.set_brightness_work gets
initialized.
This leaves a window where led_trigger_register() of a LED's default
trigger will call led_trigger_set() which calls led_set_brightness()
which in turn will end up queueing the *uninitialized*
led_classdev.set_brightness_work.
This race gets hit by the lenovo-thinkpad-t14s EC driver which registers
2 LEDs with a default trigger provided by snd_ctl_led.ko in quick
succession. The first led_classdev_register() causes an async modprobe of
snd_ctl_led to run and that async modprobe manages to exactly hit
the window where the second LED is on the leds_list without led_init_core()
being called for it, resulting in:
------------[ cut here ]------------
WARNING: CPU: 11 PID: 5608 at kernel/workqueue.c:4234 __flush_work+0x344/0x390
Hardware name: LENOVO 21N2S01F0B/21N2S01F0B, BIOS N42ET93W (2.23 ) 09/01/2025
...
Call trace:
__flush_work+0x344/0x390 (P)
flush_work+0x2c/0x50
led_trigger_set+0x1c8/0x340
led_trigger_register+0x17c/0x1c0
led_trigger_register_simple+0x84/0xe8
snd_ctl_led_init+0x40/0xf88 [snd_ctl_led]
do_one_initcall+0x5c/0x318
do_init_module+0x9c/0x2b8
load_module+0x7e0/0x998
Close the race window by moving the adding of the LED to leds_list to
after the led_init_core() call. |
| Outline is a service that allows for collaborative documentation. Prior to 1.4.0, an Insecure Direct Object Reference (IDOR) vulnerability in the document restoration logic allows any team member to unauthorizedly restore, view, and seize ownership of deleted drafts belonging to other users, including administrators. By bypassing ownership validation during the restore process, an attacker can access sensitive private information and effectively lock the original owner out of their own content. Version 1.4.0 fixes the issue. |
| Outline is a service that allows for collaborative documentation. Prior to 1.5.0, the events.list API endpoint, used for retrieving activity logs, contains a logic flaw in its filtering mechanism. It allows any authenticated user to retrieve activity events associated with documents that have no collection (e.g., Private Drafts, Deleted Documents), regardless of the user's actual permissions on those documents. While the document content is not directly exposed, this vulnerability leaks sensitive metadata (such as Document IDs, user activity timestamps, and in some specific cases like the Document Title of Permanent Delete). Crucially, leaking valid Document IDs of deleted drafts removes the protection of UUID randomness, making High-severity IDOR attacks (such as the one identified in documents.restore) trivially exploitable by lowering the attack complexity. Version 1.5.0 fixes the issue. |
| OpenEMR is a free and open source electronic health records and medical practice management application. Versions prior to 8.0.0.2 contain a Command injection vulnerability in the backup functionality that can be exploited by authenticated attackers. The vulnerability exists due to insufficient input validation in the backup functionality. Version 8.0.0.2 fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/fpsimd: signal: Fix restoration of SVE context
When SME is supported, Restoring SVE signal context can go wrong in a
few ways, including placing the task into an invalid state where the
kernel may read from out-of-bounds memory (and may potentially take a
fatal fault) and/or may kill the task with a SIGKILL.
(1) Restoring a context with SVE_SIG_FLAG_SM set can place the task into
an invalid state where SVCR.SM is set (and sve_state is non-NULL)
but TIF_SME is clear, consequently resuting in out-of-bounds memory
reads and/or killing the task with SIGKILL.
This can only occur in unusual (but legitimate) cases where the SVE
signal context has either been modified by userspace or was saved in
the context of another task (e.g. as with CRIU), as otherwise the
presence of an SVE signal context with SVE_SIG_FLAG_SM implies that
TIF_SME is already set.
While in this state, task_fpsimd_load() will NOT configure SMCR_ELx
(leaving some arbitrary value configured in hardware) before
restoring SVCR and attempting to restore the streaming mode SVE
registers from memory via sve_load_state(). As the value of
SMCR_ELx.LEN may be larger than the task's streaming SVE vector
length, this may read memory outside of the task's allocated
sve_state, reading unrelated data and/or triggering a fault.
While this can result in secrets being loaded into streaming SVE
registers, these values are never exposed. As TIF_SME is clear,
fpsimd_bind_task_to_cpu() will configure CPACR_ELx.SMEN to trap EL0
accesses to streaming mode SVE registers, so these cannot be
accessed directly at EL0. As fpsimd_save_user_state() verifies the
live vector length before saving (S)SVE state to memory, no secret
values can be saved back to memory (and hence cannot be observed via
ptrace, signals, etc).
When the live vector length doesn't match the expected vector length
for the task, fpsimd_save_user_state() will send a fatal SIGKILL
signal to the task. Hence the task may be killed after executing
userspace for some period of time.
(2) Restoring a context with SVE_SIG_FLAG_SM clear does not clear the
task's SVCR.SM. If SVCR.SM was set prior to restoring the context,
then the task will be left in streaming mode unexpectedly, and some
register state will be combined inconsistently, though the task will
be left in legitimate state from the kernel's PoV.
This can only occur in unusual (but legitimate) cases where ptrace
has been used to set SVCR.SM after entry to the sigreturn syscall,
as syscall entry clears SVCR.SM.
In these cases, the the provided SVE register data will be loaded
into the task's sve_state using the non-streaming SVE vector length
and the FPSIMD registers will be merged into this using the
streaming SVE vector length.
Fix (1) by setting TIF_SME when setting SVCR.SM. This also requires
ensuring that the task's sme_state has been allocated, but as this could
contain live ZA state, it should not be zeroed. Fix (2) by clearing
SVCR.SM when restoring a SVE signal context with SVE_SIG_FLAG_SM clear.
For consistency, I've pulled the manipulation of SVCR, TIF_SVE, TIF_SME,
and fp_type earlier, immediately after the allocation of
sve_state/sme_state, before the restore of the actual register state.
This makes it easier to ensure that these are always modified
consistently, even if a fault is taken while reading the register data
from the signal context. I do not expect any software to depend on the
exact state restored when a fault is taken while reading the context. |
| GLPI is a free Asset and IT management software package. Starting in version 11.0.0 and prior to version 11.0.6, an authenticated user can perfom a SQL injection. Version 11.0.6 fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvlan: Make the addrs_lock be per port
Make the addrs_lock be per port, not per ipvlan dev.
Initial code seems to be written in the assumption,
that any address change must occur under RTNL.
But it is not so for the case of IPv6. So
1) Introduce per-port addrs_lock.
2) It was needed to fix places where it was forgotten
to take lock (ipvlan_open/ipvlan_close)
This appears to be a very minor problem though.
Since it's highly unlikely that ipvlan_add_addr() will
be called on 2 CPU simultaneously. But nevertheless,
this could cause:
1) False-negative of ipvlan_addr_busy(): one interface
iterated through all port->ipvlans + ipvlan->addrs
under some ipvlan spinlock, and another added IP
under its own lock. Though this is only possible
for IPv6, since looks like only ipvlan_addr6_event() can be
called without rtnl_lock.
2) Race since ipvlan_ht_addr_add(port) is called under
different ipvlan->addrs_lock locks
This should not affect performance, since add/remove IP
is a rare situation and spinlock is not taken on fast
paths. |
| dr_libs version 0.13.3 and earlier contain an uncontrolled memory allocation vulnerability in drflac__read_and_decode_metadata() that allows attackers to trigger excessive memory allocation by supplying crafted PICTURE metadata blocks. Attackers can exploit attacker-controlled mimeLength and descriptionLength fields to cause denial of service through memory exhaustion when processing FLAC streams with metadata callbacks. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix devlink reload call trace
Commit 4da71a77fc3b ("ice: read internal temperature sensor") introduced
internal temperature sensor reading via HWMON. ice_hwmon_init() was added
to ice_init_feature() and ice_hwmon_exit() was added to ice_remove(). As a
result if devlink reload is used to reinit the device and then the driver
is removed, a call trace can occur.
BUG: unable to handle page fault for address: ffffffffc0fd4b5d
Call Trace:
string+0x48/0xe0
vsnprintf+0x1f9/0x650
sprintf+0x62/0x80
name_show+0x1f/0x30
dev_attr_show+0x19/0x60
The call trace repeats approximately every 10 minutes when system
monitoring tools (e.g., sadc) attempt to read the orphaned hwmon sysfs
attributes that reference freed module memory.
The sequence is:
1. Driver load, ice_hwmon_init() gets called from ice_init_feature()
2. Devlink reload down, flow does not call ice_remove()
3. Devlink reload up, ice_hwmon_init() gets called from
ice_init_feature() resulting in a second instance
4. Driver unload, ice_hwmon_exit() called from ice_remove() leaving the
first hwmon instance orphaned with dangling pointer
Fix this by moving ice_hwmon_exit() from ice_remove() to
ice_deinit_features() to ensure proper cleanup symmetry with
ice_hwmon_init(). |
| OpenEMR is a free and open source electronic health records and medical practice management application. Prior to 8.0.0.2, the DICOM zip/export feature uses a user-supplied destination or path component when creating the zip file, without sanitizing path traversal sequences (e.g. `../`). An attacker with DICOM upload/export permission can write files outside the intended directory, potentially under the web root, leading to arbitrary file write and possibly remote code execution if PHP or other executable files can be written. Version 8.0.0.2 fixes the issue. |
| miniaudio version 0.11.25 and earlier contain a heap out-of-bounds read vulnerability in the WAV BEXT metadata parser that allows attackers to trigger memory access violations by processing crafted WAV files. Attackers can exploit improper null-termination handling in the coding history field to cause out-of-bounds reads past the allocated metadata pool, resulting in application crashes or denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: qfq: Use cl_is_active to determine whether class is active in qfq_rm_from_ag
This is more of a preventive patch to make the code more consistent and
to prevent possible exploits that employ child qlen manipulations on qfq.
use cl_is_active instead of relying on the child qdisc's qlen to determine
class activation. |
| OpenEMR is a free and open source electronic health records and medical practice management application. Prior to 8.0.0.2, the encounter vitals API accepts an `id` in the request body and treats it as an UPDATE. There is no verification that the vital belongs to the current patient or encounter. An authenticated user with encounters/notes permission can overwrite any patient's vitals by supplying another patient's vital `id`, leading to medical record tampering. Version 8.0.0.2 fixes the issue. |
| A path traversal vulnerability was identified in Ray Dashboard (default port 8265) in Ray versions prior to 2.8.1. Due to improper validation and sanitization of user-supplied paths in the static file handling mechanism, an attacker can use traversal sequences (e.g., ../) to access files outside the intended static directory, resulting in local file disclosure. |
| Protection mechanism failure in wolfCrypt post-quantum implementations (ML-KEM and ML-DSA) in wolfSSL on ARM Cortex-M microcontrollers allows a physical attacker to compromise key material and/or cryptographic outcomes via induced transient faults that corrupt or redirect seed/pointer values during Keccak-based expansion.
This issue affects wolfSSL (wolfCrypt): commit hash d86575c766e6e67ef93545fa69c04d6eb49400c6. |
| In the Linux kernel, the following vulnerability has been resolved:
timekeeping: Adjust the leap state for the correct auxiliary timekeeper
When __do_ajdtimex() was introduced to handle adjtimex for any
timekeeper, this reference to tk_core was not updated. When called on an
auxiliary timekeeper, the core timekeeper would be updated incorrectly.
This gets caught by the lock debugging diagnostics because the
timekeepers sequence lock gets written to without holding its
associated spinlock:
WARNING: include/linux/seqlock.h:226 at __do_adjtimex+0x394/0x3b0, CPU#2: test/125
aux_clock_adj (kernel/time/timekeeping.c:2979)
__do_sys_clock_adjtime (kernel/time/posix-timers.c:1161 kernel/time/posix-timers.c:1173)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131)
Update the correct auxiliary timekeeper. |
| An issue in the VirtualHost configuration handling/parser component of aaPanel v7.57.0 allows attackers to cause a Regular Expression Denial of Service (ReDoS) via a crafted input. |
| A lack of path validation in aaPanel v7.57.0 allows attackers to execute a local file inclusion (LFI), leadingot sensitive information exposure. |
| An arbitrary file upload vulnerability in aaPanel v7.57.0 allows attackers to execute arbitrary code via uploading a crafted file. |
